Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
If you cannot see the main screen, click
Key function
The software sets the "Key function"
the external unit used by the interlocutor (see page 35 for configuration).
The Key function woks both during calls and outside calls. Up to 2 procedures can be
programmed for each mode (in-call or standby).
` Click on the button (
function to carry out the programmed procedure(s).
I/O Actuator function
The I/O Actuator function (disabled by default) can be used to activate the relay for a specific
actuator installed in the system (see page 36 for configuration).
` Click on the button (
Actuator function to carry out the programmed procedure.
Intercom function
The intercom function (disabled by default) can be used to call an internal unit (monitor,
switchboard, door-entry phone or PC-Intercom) (see page 37 for configuration).
` Click on the button (
to make the call.
Self-ignition function
The Self-ignition function (disabled by default) can be used to display images from the camera
associated with an external unit or from a remote camera (see page 38 for configuration).
` Click on the button (
Self-ignition function to display the images from the camera.
If several cameras are associated with the Self-ignition function, click the button several times
to view the various video sources in a cyclical manner.
Privacy / Doctor mode
The software sets "Privacy mode" by default (see page 39 for configuration).
` Click on
The button will light up in red to indicate that the function has been activated.
Call Divert Function
The "Call Divert" function enables you to divert a call to an internal unit or switchboard.
(see page 40 for configuration).
` Click
to activate/deactivate the programmed function.
The red icon indicates that the function is active, while the green icon indicates that the
function is not active.
for default "in-call" activation of the relay corresponding to
/
/
/
/
/
/
/
/
to activate the programmed function.
to return to the home screen.
/
/
) programmed for the Key
/
/
) programmed for the I/O
/
) programmed for the Intercom function
/
/
) programmed for the
26
Publicidad
Capítulos
Tabla de contenido
