WIKA CTD4000 Manual De Instrucciones página 31

12. Specifications
Specifications
Display
Temperature range
1)
Accuracy
2)
Stability
Resolution
Temperature control
Heating time
Cooling time
3)
Stabilisation time
Insert
Immersion depth
Insert dimensions
Insert material
Voltage supply
Operating voltage
Power consumption
Fuse
Power cord
Communication
Interface
Case
Dimensions (W x D x H)
Weight
1) Is defined as the measuring deviation between the measured value and the reference value.
2) Maximum temperature difference at a stable temperature over 30 minutes.
3) Time before reaching a stable value.
The measurement uncertainty is defined as the total measurement uncertainty (k = 2), which contains the following shares:
Accuracy, measurement uncertainty of reference, stability and homogeneity.
Certificates
Certificate
Calibration
Recommended recalibration interval
Approvals and certificates, see website
For further specifications see WIKA data sheet CT 41.10 and the order documentation.
WIKA operating instructions, model CTD4000
Model CTD4000-375
t + 15 °C ... 375 °C [t + 15 °F ... 707 °F]
amb amb
0.35 K
±0.1 K
0.1 °C
approx. 20 min from 30 to 375 °C
[from 86 °F to 707 °F]
approx. 40 min from 375 to 100 °C
[from 707 °F to 212 °F]
dependent on temperature and temperature probe
150 mm [5.91 in]
Ø 26 x 150 mm [Ø 1.02 x 5.91 in]
Aluminium
AC 115/230 V ±10 %, 50/60 Hz
Automatically switchable
600 W
6.3 A slow blow fuse (at AC 115 V)
3.15 A slow blow fuse (at AC 230 V)
AC 230 V; for Europe
RS-232
130 x 260 x 280 mm [5.12 x 10.24 x 11.02 in]
5.4 kg [11.9 lbs]
Without
■
3.1 calibration certificate per DIN EN 10204
■
DKD/DAkkS calibration certificate
■
1 year (dependent on conditions of use)
Model CTD4000-650
t + 15 °C ... 650 °C [t + 15 °F ... 1,202 °F]
amb amb
0.5 K
±0.3 K
approx. 35 min from 50 to 650 °C
[from 122 °F to 1,202 °F]
approx. 60 min from 650 to 100 °C
[from 1,202 °F to 212 °F]
Brass, nickel-plated
6 kg [13.2 lbs]
EN
31