1/ Safety Instructions; Risk Of Electric Shock - POOL Autosalt Manual De Usario

1 / SAFETY INSTRUCTIONS
READ AND FOLLOW CAREFULLY ALL INSTRUCTIONS BEFORE INSTALLING AND USING THIS DEVICE
In this manual, this symbol indicates a WARNING.
It will alert you of the risk of damage to equipment or serious injury on people. It is IMPERATIVE always
comply with this warnings !
In order to improve the product quality, the manufacturer reserves the right to change the characteristics
of its products at any time and without prior notice.
To prevent injuries or accidents, install the equipment out of reach of children.
Ensure that the local installation complies with the regulations in force in the country of installation.
The pump timer power supply line of filtration should be protected by a differential circuit breaker
with a tripping safety device of 30 mA maximum with opening distance of contact, of at least 3 mm on
all the poles. Not confuse with the differential circuit breaker protecting the whole house which is
about 300 to 500 mA. In case of doubt, get a qualified electrician to check the whole installation in
your area installation. The installation of this equipment should be performed by a qualified person in
accordance with the electrical standards in force in the country of installation.
The power supply cables and the cell must be protected against accidental damage. A damaged cable
must be replaced immediately and exclusively with an original cable. Never cut or extend the cables.
It is imperative to turn off the power supply before carrying out any technical operation on the device.
Do not modify the device. Any modification may damage the device or be dangerous for people. Only
qualified person should carry out maintenance or repairs in case of breakdown.
This device is intended for use in family pools only.
NON OBSERVANCE OF THESE INSTRUCTIONS MAY CAUSE DAMAGE TO THE DEVICE OR SERIOUS
INJURY
It is recommended to use only spart parts and/or replacement units from POOL TECHNOLOGIE
The safety instructions detailed in this manual are not exhaustive. They highlight the most common risks of
using electrical equipments in the presence of water. Any installation and use of this equipment should be
carried out with caution and common sense.
AUTOSALT®/POOLSQUAD®/POOLSQUAD® AMPERO/PRO - PAPI004082 – FR/EN/ES/DE - Rev.03.16

RISK OF ELECTRIC SHOCK

2