Orp Regulation Option (Poolsquad® Pro) : Rx; Filtration Time; Ph Regulation Instructions - POOL Autosalt Manual De Usario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CHLORINATION
CHLORINATION
SALT
SALT
◄►
◄►
OK
OK
✓ The regulation instruction in free chlorine probe is configured at 1.0 particle by million by default. If
necessary, you can change this value by using the setting menu :
CHLORINATION
SALT
◄►
OK
4/ ORP regulation Option (Poolsquad ®Pro) : Rx
➢ Calibrate the ORP probe.
Put ORP probe in standard solution. Choose value of standard solution (usually 470 mV). You have to
do probe calibration with key OK.
CONFIGURATION
◄►
OK
✓ The regulation instruction in free chlorine probe is configured at 650 mV by default. If necessary, you
can change this value by using the setting menu :
CHLORINATION SALT
◄►
6

FILTRATION TIME

The device is enslaved to the filtration, the chlorine production then directly depends on the calibration of
the day functioning time of your filtration. The setting time of day filtration depends on the evolution of the
water temperature. The more the water is hot, the more you have to filter to maintain the ideal chlorine
rate. During the high season, insure you to calibrate the day filtration time according to the board below :
T (°C)
16
Time (h)
8
For the Poolsquad® Model
7
PH REGULATION INSTRUCTION
The pH regulation instruction is configured at 7,0 ppm by default. . If necessary, you can change this value by
using the setting menu :
REGUL. PH
REGUL. PH
◄►
◄►
OK
OK
8
PH PROBE CALIBRATION
No calibration is to be made during the first started of the device, the probe is already calibrated in factory.
Afterward, the calibration of the pH probe should be done each year, at the beginning of the bathing season
(see §6.1).
AUTOSALT®/POOLSQUAD®/POOLSQUAD® AMPERO/PRO - PAPI004082 – FR/EN/ES/DE - Rev.03.16
Cl FREE CALIBRATION
Cl FREE CALIBRATION
◄►
◄►
OK
OK
Cl FREE INSTRUCTION
◄►
OK
CHLORINATION SALT
◄►
OK
18
20
9
10
PH INSTRUCTION
PH INSTRUCTION
◄►
◄►
CHOOSE VALUE
CHOOSE VALUE
◄►
◄►
1.0 PPM
▼▲
CALIBRATION Rx
PROBE
OK
Rx
INSTRUCTION
650 mV
OK
▼▲
22
24
11
12
7.0
7.0
▼▲
▼▲
OK
OK
1.0 PPM
1.0 PPM
▼▲
▼▲
OK
OK
470 mV
OK
▼▲
26
28
14
17
30
Plus
19
24/24
19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

PoolsquadPoolsquad amperoPoolsquad pro

Tabla de contenido