Chlorine Probe Assembly On The Measuring Chamber - POOL Autosalt Manual De Usario

Recommendations:
✓ The recommended flow in the diversion heat contactor is of 30l/h. The measure of the probe is sensitive
to the variations of flow. A modification of the probe supply flow will require a new calibration of free
chlorine rate.
✓ Ampero and Pro model: The filter with sieve helps to avoid that the impurities come in the derivation and
block it. The maintenance frequency of the filter with sieve will depend of the quantity of impurities
filtered. As a general rule, for the classical installations, a cleaning a month should be enough.
CHLORINE PROBE ASSEMBLY ON THE MEASURING CHAMBER (Ampero Model)
9
AUTOSALT®/POOLSQUAD®/POOLSQUAD® AMPERO/PRO - PAPI004082 – FR/EN/ES/DE - Rev.03.16
1/ Install the strut.
2/ Install the nut on the chlorine probe.
3/ Slide the grey mobile collet.
4/ Slide the O-ring.
5/ Take up the junction strut.
6/ Position properly the O-ring in the strut
gorge.
9