Replacing A Paper Roll - Sony UPA-PC700 Manual De Instrucciones

2
Insert a new paper roll.
3
Unroll a short length of paper.
4
Close the receipt printer cover so that the end of the
unrolled paper emerges from the printer.

Replacing a Paper Roll

Before replacing a paper roll, make sure the unit is turned
off. For details about operations, refer to the User's Guide.
1
Open the receipt printer cover by inserting the eject
pin into the eject hole on the left.
Note
Make sure to insert the pin straight into the hole. The
cover will not open if the pin is inserted at an angle.
Caution
Never attempt to pull open the cover. This may break
the cover.
2
Remove the used paper roll.
3
Complete steps 2 to 4 of "Inserting a Paper Roll" on
page 6.
7
Using the Receipt Printer