Hitachi DS 14DBSL Instrucciones De Manejo página 8

English
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level:
Measured A-weighted sound pressure level:
Uncertainty K: 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Drilling into metal:
Vibration emission value
Uncertainty K = 1.5 m/s
2
Impact drilling into concrete:
Vibration emission value
Uncertainty K = 1.5 m/s
2
The declared vibration total value has been measured in
accordance with a standard test method and may be used
for comparing one tool with another.
It may also be used in a preliminary assessment of exposure.
WARNING
○ The vibration emission during actual use of the power
tool can diff er from the declared total value depending in
the ways in which the tool is used.
○ Identify safety measures to protect the operator that are
based on an estimation of exposure in the actual conditions
of use (taking account of all parts of the operating cycle
such as the times when the tool is switched off and when it
is running idle in addition to the trigger time).
NOTE
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
83 dB (A) (DS14DBSL)
87 dB (A) (DS18DBSL)
100 dB (A) (DV18DBSL)
72 dB (A) (DS14DBSL)
76 dB (A) (DS18DBSL)
89 dB (A) (DV18DBSL)
a
, D < 2.5 m/s
2
h
(DS14DBSL, DS18DBSL)
(DS14DBSL, DS18DBSL)
a
, ID = 7.5 m/s DV18DBSL)
2 (
h
(DV18DBSL)
8