Operation - Bartscher 110801 Manual Del Usario

Connection
WARNING! Risk of electric shock!
Improper installation of the device may result in serious injury!
Prior to installation ensure the local electrical network parameters match those
on the rating plate.
Only connect the device in case of full compliance! Follow all safety rules!
•
Before using the device, it should be left in place for two hours following setup
before it is connected to a power source.
•
After a power failure or removing the plug, do not connect the device to a
power source for at least 5 minutes.
•
The electrical circuit must be secured to a minimum of 16A. Only connect the device
directly to a wall socket, do not use extension cords or power strips.
•
Place the device so that its plug is easily accessible to disconnect the device in case of
need.

5.3 Operation

•
After unpacking and prior to connection, clean the device according to the
instructions in 6.2 "Cleaning".
•
Connect the device to a single, grounded outlet.
•
Turn the device on via the ON/OFF switch located at the front. The green power
control light will come on.
•
When turned on, the display will show the following:
temperature will also be shown.
•
Before placing food products and beverages inside, the refrigerated counter should
first reach the desired temperature.
.
and The default
- 31 -