Zodiac MX 8 Manual Del Propietário página 9

Owner's Manual
Remove Debris from Engine
To avoid serious injury, make sure that the cleaner is disconnected from the hose and the suction pump used for the cleaner is turned
off prior to starting this operation.
1. Push the latch release button on the top of the cleaner (Figure 10).
2. Rotate the top assembly back until it clicks into an upward position.
3. Look into engine and remove debris that is present.
4. If needed, slowly push engine paddles forward and/or backwards to move stuck debris to an accessible
position then remove it. When moving the engine paddles, make sure the cleaner tracks are allowed to move
freely as they will turn as the engine paddles rotate.
5. Close engine top and ensure the latch clicks in place.
|
Zodiac ® MX8 Pool Cleaner
™
WARNING
Latch Release
Button
Figure 10
ENGLISH Page 9