Neutral Adjustment (Gas Units); Neutral Adjustment (Diesel Units) - Textron JACOBSEN Groom Master II Manual De Piezas Y Mantenimiento

3.4

NEUTRAL ADJUSTMENT (GAS UNITS) ________________________________________

1. Allow engine and hydraulic system to reach normal
operating temperature. Move unit to a flat and level
surface.
2. With engine running at full throttle, and traction pedal in
Neutral, release parking brake. Unit should not "creep"
in either direction.
3. If unit creeps in forward direction, remove hardware (E)
and turn rod ends (F) clockwise (Shorten rod) as
required.
4. If unit creeps in reverse direction, remove hardware (E)
and turn rod ends (F) counter-clockwise (Lengthen
rod) as required.
3.5

NEUTRAL ADJUSTMENT (DIESEL UNITS) _____________________________________

1. Allow engine and hydraulic system to reach normal
operating temperature. Move unit to a flat and level
surface.
2. With engine running at full throttle, and traction pedal in
Neutral, release parking brake. Unit should not "creep"
in either direction.
3. If unit creeps in forward direction, remove hardware (E)
and turn rod ends (F) counter-clockwise (Lengthen
rod) as required.
4. If unit creeps in reverse direction, remove hardware (E)
and turn rod ends (F) clockwise (Shorten rod) as
required.
ADJUSTMENTS
F
E
F
E
3
Figure 3C
Figure 3D
en-11