Specifications; Product Identification; Engine - Textron JACOBSEN Groom Master II Manual De Piezas Y Mantenimiento

2

SPECIFICATIONS

2.1 2 SPECIFICATIONS

PRODUCT IDENTIFICATION_________________________________________________

88010.............................. Groom Master II 3-WD Groomer, 18
88042.............................. Groom Master II 3-WD Groomer,
Serial Number ................. An identification plate, like the one
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
2.2

ENGINE__________________________________________________________________

Gasoline Engine
Make ............................... Briggs &Stratton
Model .............................. Vanguard V-Twin OHV
Horsepower .................... 18 hp (13.5 kW) @3600 rpm
Note: Actual sustained horsepower will likely be lower
than listed in specifications due to operating limitations
and environmental factors.
Displacement .................. 34.8 cu. In. (570 cc)
Torque ............................ 26 ft. lbs. (35 Nm) @ 2600 rpm
Fuel:
Type .......................... Unleaded Gasoline
Rating ....................... Min. 85 Octane
Capacity .................... 4.5 U.S. Gal. (17 liters)
NOTICE
Do not use hi-test gasoline or an oil-gasoline mixture.
When using blended fuel, do not use a blend with more
than 10% ethanol. Under no circumstances should you
use a blend with methanol.
Governor ......................... Flyweight Mechanical
Lubrication:
Capacity .................... 3.5 pints (1.4 liters)
Type .......................... SAE 10W30, SAE 30W
API Classification ...... SF, SG, SH
Air Filter ........................... Replaceable Dual Element.
Alternator ........................ 16 amp
Cooling System ............... Air Cooled
en-6
hp gasoline engine.
16.6 hp diesel engine.
shown, listing the serial number, is
attached to the frame of the
groomer on the seat pan.
446
kg kg
SAND RAKE
GROOMS MASTER II
EEC Sound
Product
Power
88010 TBD
88042 101.3 dB
Diesel Engine
Make............................... Kubota
Model.............................. D722-E3B
Horsepower .................... 16.6 hp (12.4 kW) @3000 rpm
Note: Actual sustained horsepower will likely be lower
than listed in specifications due to operating limitations
and environmental factors.
Displacement.................. 43.88 cu. In. (719 cc)
Torque ............................ 33.9 ft. lbs. (45.9 Nm) @2200 rpm
Fuel:
Type.......................... No. 2 Low or Ultra Low Sulfur Diesel
Rating ....................... Min. Cetane rating 45
Capacity.................... 4.5 U.S. Gal. (17 liters)
Governor......................... Ball Type Governor
Low Idle .................... 1100 RPM
High Idle .................... 3400 RPM
Lubrication:
Capacity.................... 3.4 quarts (3.2 liter) with filter
Type.......................... SAE10W30, SAE 20W, SAE 30W
API Classification ...... CD, CE
Air Filter........................... Dry type with evacuator valve and
Alternator ........................ 40 amp
Cooling System ............... Liquid Cooled
Capacity...................... 3qt. (2.8 l) 50/50 water ethylene glycol
®
P.O. BOX 7708,
CHARLOTTE,
NC 28241, USA
Jacobsen.com
1-800-848-1636 (US)
13.5 XXXX
kg kW
88010
1651
Vibration M/S
Operator
Ear
Arms Body
TBD TBD TBD
85.2 dB 8.4 0.507
service indicator.
mix
2