Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-0000000014-002.book Page 8 Tuesday, April 19, 2011 4:31 PM
en
8
Intended use of the power tool:
hand-guided power tool for use in weather-
protected environments without water sup-
ply, using the application tools and accessories
recommended by FEIN:
– for cutting polyurethane beads for glazier
work in automobiles
– for sawing out chassis sections and remov-
ing underseal materials
Symbols.
Symbol, character
Explanation
Make sure to read the enclosed documents such as the Instruction Man-
ual and the General Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving
back and forth.
Warning against sharp edges of application tools, such as the cutting
edges of the cutter blades.
Observe the instructions in the text or graphic opposite!
Before commencing this working step, remove the battery from the
power tool. Otherwise there may be danger of injury caused by unin-
tentional starting of the power tool.
Use eye protection during operation.
Use hearing protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g.,
against continuous intense sunlight.
Observe the information in the adjacent text!
This symbol confirms the certification of this product for the USA and
Canada.
This sign warns of a directly imminent, dangerous situation. A false reac-
DANGER
tion can cause a severe or fatal injury.
This sign indicates a possible dangerous situation that could cause severe
WARNING
or fatal injury.
– for sanding of chassis parts
– for sawing wood, plastic, glass-fibre rein-
forced plastics (GFRP) and for sawing sheet
metal (max. 1 mm)
– for removing tile joints and rasping or
scraping off tile grout or carpet remainders
– for sanding or rasping of smaller surfaces.
Publicidad
