LEMAN TAB085 Manual De Instrucciones página 44

SPECIFIC SAFETY RULES FOR THE WOOD LATHE
Read and understand the entire owner‟s manual before operating the lathe.

Read and understand the warning labels on the lathe.

ALWAYS wear a safety face shield or safety goggles.

Before turning on the B2198, make sure all locks are tightened.

Do not wear gloves, jewelry, neckties or loose clothing.

ALWAYS inspect your workpiece for splits or defects. Do not attempt to turn a defective

workpiece.
ALWAYS use the slowest speed when rough-turning a new workpiece.

ALWAYS make sure that your workpiece runs free and clear of the tool rest and any other

fixed components that may strike the rotating work.
ALWAYS be sure that the tool rest is positioned ABOVE the horizontal center line of the

workpiece.
NEVER allow your turning tools to „bite‟ into the turning workpiece.

ALWAYS „round‟ the workpiece before mounting on a faceplate by cutting off as many corners

as possible. Make certain that the faceplate is securely mounted to the headstock.
Check all stock for loose knots and remove them.

Sawdust from some wood species may be toxic. Be aware of this and use the lathe in a well-

ventilated area, use a dust collection system and wear a dust mask.
NEVER reach over a rotating workpiece.

EN
4