Maintenance - LEMAN TAB085 Manual De Instrucciones

VARIABLE SPEED WOOD LATHE
WARNING - FOR YOUR OWN SAFETY, TURN THE LATHE OFF AND
DISCONNECT THE POWER PLUG FROM THE POWER SOURCE BEFORE
PERFORMING ANY MAINTENANCE OR LUBRICATION WORK ON THE
LATHE.
Vacuum and/or blow out any dust accumulation inside the motor housing

on a regular basis.
Apply a coat of paste wax to the lathe bed to help keep it clean and to

facilitate the easy movement of the articulated tool rest and tailstock.
Proper Oiling and maintenance must take place to ensure the quality and

life of the machine. To Maintain this, the use of a pin point oiler would be
helpful. Take the headstock cover off, and oil the point in the diagram. This
should be done periodically.
Periodic lubrication (white grease) of the spring levers and other threaded parts
will make them easier to operate and prevent any possible corrosion.

Maintenance

EN
16