Electrical Information - LEMAN TAB085 Manual De Instrucciones

VARIABLE SPEED WOOD LATHE

Electrical Information

In the event of a malfunction or breakdown, grounding provides the path of least
resistance for electrical current to reduce the risk of electrical shock. This lathe is
equipped with an electrical cord that has an equipment grounding conductor wire
and a grounding plug. The plug MUST be plugged into a matching outlet that is
properly installed and grounded in accordance with ALL local codes and
.
ordinances
DO NOT MODIFY THE PLUG. If the plug on the lathe will not fit, have the proper
outlet installed by a qualified electrician.
IMPROPER CONNECTION of the plug-grounding conductor can result in an
electrical shock.
CHECK with a qualified electrician if you are not certain that the lathe is properly
and safely grounded.
USE ONLY 3-WIRE EXTENSION CORDS that have 3-prong grounding type
plugs.
Repair or replace a damaged electrical cord immediately.
A SEPARATE 15-AMPERE CIRCUIT IS RECOMMENDED FOR STATIONARY
POWER TOOLS SUCH AS THIS.
6
EN