Headstock - LEMAN TAB085 Manual De Instrucciones

VARIABLE SPEED WOOD LATHE

Headstock

The headstock has 5 pre-set positions.

0 degrees
applications, 60, 90 and 120 degrees for
use when making faceplate turnings and
180 degrees when using the extension
bed and the tool rest.
To set the headstock in the desired

position you must first turn the headlock
handle (1) until you have completed at
least one full rotation.
Pull out the headstock release (2).

Rotate the entire headstock in a

clockwise rotation
position. The headstock will „click‟ into
one of the pre-set settings.
Tighten the headlock handle (1).

Adjustments
for all spindle turning
to the desired
EN
12