Fein Turbo I Instrucciones De Uso página 16

OBJ_BUCH-0000000150-004.book Page 16 Tuesday, May 5, 2015 10:33 AM
en
16
Working instructions.
Before mounting or replacing accessories, pull the mains plug. This preventive
WARNING
safety measure rules out the danger of injuries through accidental starting of the
vacuum cleaner.
Switching on and off (figure 9).
Check the power supply cable
WARNING
and the plug for damage.
Switching on:
Set the On/Off switch to (I).
Switching off:
Set the On/Off switch to (0).
Switching on and off with a power tool con-
nected:
Switch the vacuum cleaner off before con-
necting a power tool to the vacuum cleaner's
socket outlet. Make sure that the power tool
is switched off when inserting its plug into the
vacuum cleaner's socket outlet.
The vacuum cleaner is automatically switched
on and off via the power tool connected to
the integrated socket outlet.
Plug the mains plug of the power tool into the
integrated socket outlet.
Set the on/off switch of the VAC to the mains
plug symbol.
Switch the power tool on/off – the vacuum
cleaner automatically starts/stops.
After switching off a power tool connected to
the vacuum cleaner's socket outlet, the vac-
uum cleaner will run on for approx. 15 sec-
onds and then automatically switch off.
Fig. 9
On/Off switch
4.
3.
On/Off switch
Integrated
socket outlet
1.
2.
On/Off switch