Service Records - DBI SALA 3900105 Manual De Servicio

2.2 SERVICE RECORDS: It is recommended that service records be kept on permanent fi le. This information
should include: Model Number, Serial Number, Date of Service, condition prior to service, parts replaced by
Part Number, Lot Numbers of applicable parts, and condition upon completion of service. An "Inspection and
Maintenance Log" is provided for this purpose in the back of the "Sealed-Blok Self Retracting Lifelines User
Instructions" (5903774, 5903775, 5903776, or 5903777).
For traceability purposes, record the lot number of the FAST-Line
Replacement Log" on the back cover of this manual.
3.0 FAST-Line™ REPLACEMENT LIFE LINE INSTALLATION
3.1 BEFORE YOU START: Verify that all parts are included with the FAST-Line™ Lifeline Replacement Kit (see
Table 2). Make sure all tools required for replacing the lifeline are on hand (see Table 3).
Table 2 - FAST-Line™ Kit Parts
Quantity Description
1 Lifeline Assembly (see Table 1)
1 Cap, 3/8 inch, black plastic
1 Cap, 1 inch, black plastic
1 Set Screw, 1/4 inch dia. - 20 x 3/8 inch,
Stainless Steel
1 Lock Nut, 3/8 Inch - 16, Stainless Steel
Table 3 - Tools Required
1/8 inch Allen Wrench
3/8 inch Open End Wrench
9/16 inch Open End Wrench
Flat Blade Screwdriver
Gloves
Drum Locking Tool - Order from Capital Safety (Part
Number 9600037), Reusable.
3.2 REMOVE OLD LIFELINE:
3.2.1: Push the plastic cable guide bushing at
bottom of SRL in about ¼ inch.
cable assembly on the "Lifeline
M
3.2.2: Turn 180 degrees either clockwise or
counterclockwise
3