Fein AGSZ18-280BL Instrucciones De Uso página 11

OBJ_BUCH-0000000289-001.book Page 11 Wednesday, November 22, 2017 8:24 AM
Intended use of the power tool:
Hand-guided straight grinder for dry grinding
of metal with small grinding accessories
(grinding points) for shaping metal with hard
metal cutters and for cut-off grinding.
Symbols.
Symbol, character Explanation
General prohibition sign. This action is prohibited.
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction
Manual and the General Safety Instructions.
Before commencing this working step, remove the battery from the
power tool. Otherwise there may be danger of injury caused by
unintentional starting of the power tool.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g.
against continuous intense sunlight.
A surface that can be touched may be very hot and thus hazardous.
Switching on
Switching off
Confirms the conformity of the power tool with the guidelines of the
European Community.
This symbol confirms the certification of this product for the USA and
Canada.
This sign warns of a directly imminent, dangerous situation. A false
DANGER
reaction can cause a severe or fatal injury.
This sign indicates a possible dangerous situation that could cause severe
WARNING
or fatal injury.
This sign warns of a possible dangerous situation that could cause injury.
CAUTION
Worn out power tools and other electrotechnical and electrical prod-
ucts should be sorted separately for environmentally-friendly recycling.
AGSZ18-90 LBL: This power tool is addition-
ally intended for wire-brushing and polishing
in weather-protected environments with the
accessories recommended by FEIN.
en
11