Alarm Setting - Eton Satellit 750 Manual Del Propietário

ATS (AUTO TUNING STORAGE)
MEMORY STORAGE
One can automatically store the strongest LW, AM or FM stations
into Page 0.
Turn on the radio and select the band that you want ATS to take place in,
either MW/LW or FM. Press the MW/LW or FM for 2 seconds. Notice that
page 0 (P0) appears in the display's upper right corner with the presets to
the right increasing as the band is scanned and frequencies are stored into
the memory.
CLOCK (TIME) SETTING
The SATELLIT 750's clock is in 24-hour format and can be set with the
radio on or off. When the radio is turned off the clock shows in mid-display.
When the radio is turned on the clock shows in the upper right corner of the
display.
To set the clock:
1. Press the TIME button for about a second or until you see the hour
flashing.
2. While it's flashing turn the TUNING knob to set it to the correct hour,
then press TIME and note that the minutes are flashing.
3. While it's flashing turn the TUNING knob to set it to the correct minutes,
then press TIME.
Note that after setting the hour or minutes you can simply let the flashing
number time-out, without pressing the TIME button.
14
SATELLIT 750 OWNER'S MANUAL

ALARM SETTING

The SATELLIT 750 has two, independently programmable alarm timers to
turn it on and off at a specified time.
To set an alarm:
1. Press the AL.1 or AL.2 button for a second or until you see the alarm hour
flashing in the upper right corner of the display. While it's flashing adjust
the hour with the TUNING knob and press the AL.1 or AL.2 button. Notice
that the alarm minutes are flashing.
2. While it's flashing adjust the alarm minutes with the TUNING knob and
press the AL.1 or AL.2 button. Notice the sleep timer flashing in the box
at the top of the display.
3. While it's flashing adjust the time that the radio is to play with the TUN-
ING knob and press the AL.1 or AL.2 button.
Note that after setting the hour or minutes you can simply let the flashing
number time-out, without pressing the AL.1 or AL.2 button.
Once the alarm is on (by radio or buzzer), only the POWER, SLEEP, LIGHT/
SNOOZE and RESET can be operated. Press the POWER or SLEEP buttons
to turn off the alarm.
ALARM BY BUZZER
Press on [AL.1 on/off] key to select "
alarm will be on by the buzzer.
Note: In "Timer A" section:
" " Means timer is set by radio.
" " Means timer is set by buzzer.
" " Means Timer is off.
SATELLIT 750 OWNER'S MANUAL
" in "Timer A" section. Now, the
15