Activating And Deactivating The Alarm - Eton SOLARLINK FR600 El Manual Del Propietario

3) Press <> or <> shortly to select "SET UP ALARM--ALM"
option.
4) Press <SELECT> shortly once to enter the date setting mode.
5) Press <> or <> shortly to select "HOUR : MINUTE" option.
6) Press <> or <> shortly to set "HOUR : MINUTE" option.
7) After setting, press <SELECT> shortly to save.

2. ACTIVATING AND DEACTIVATING THE ALARM

Press <ALARM ON/OFF> shortly to activate or deactivate the
alarm.
If the alarm function is activated, the alarm symbol "
and alarm time will appear in the display. When the alarm time is
reached, the unit will beep.
If the alarm function is deactivated, the alarm symbol "
and alarm time will disappear from the display.
10
SOLARLINLK FR600 OWNER'S MANUAL

AL"

AL "
3. SNOOZE BUTTON
When the alarm activates, pressing the <SNOOZE> button
shortly deactivates it for 5 minutes ("
play), then it starts again.
BROADCAST RECEPTION
1. Select the power supply mode.
2. Select the band:
FM Band: Revolve the <Band Selecting Knob> to "FM"
position.
AM Band: Revolve the <Band Selecting Knob> to "AM"
position.
SW Band: Revolve the <Band Selecting Knob> to "SW"
position.
3. Adjust the volume: Revolve <Volume Adjusting Knob> to
adjust the volume level.
4. Tuning in stations:
Manual Tuning: Press <> or <> shortly to tune.
Auto Tuning: Press and hold <> or <> to tune.
Note: When listening to FM, pull up the telescopic antenna all
the way. When tuning AM stations the telescopic antenna is not
needed and can be lowered.
SOLARLINLK FR600 OWNER'S MANUAL
" appears in the dis-
11