Preventing Property Damage - Schluter LT ES 11 Manual De Uso

EN
Safety
Possibility of deadly burn injuries or smoke inhalation if the sealing glue ignites.

– Keep the sealing glue away from ignition sources.
Possibility of deadly burn injuries or smoke inhalation if incorrectly laid components

ignite.
– Observe the minimum distances specified in these instructions.
Danger of death due to suffocation if children swallow small parts.

– Store the end caps in such a way that they are kept away from children.
– Store the silica gel balls in such a way that they are kept away from children.
– After mounting, dispose of the silica gel balls according to the applicable
regulations.
2.3.2 Preventing injuries
Eye injuries from dazzling LED strips.

– Never look directly into a lit LED strip.
– Position the LED strip in such a way that no one can look directly into the light
source.
Swallowing the sealing glue can result in nausea and vomiting.

– Store the sealing glue in such a way that it is kept away from children.
Irritation of the eyes or skin due to skin with the sealing glue.

– Prevent contact with the eyes and skin.
– Store the sealing glue in such a way that it is kept away from children.

2.4 Preventing property damage

Damage to the LED strip through improper connection.

– Make sure that all other work is performed only by qualified, expert personnel.
– Connect the cables only with the provided terminal connectors.
Damage to the LED strip due to moisture.

– Observe the protection class of the respective component.
Damage to the LED strip due to mechanical loads.

– Make sure a bending radius of 20 mm is not exceeded (see Fig. D).
Damage to the LED strip due to electrostatic discharges.

– Make sure static charges are discharged.
– Make sure that the LED strip is stored only in the provided packaging.
24 Directions for use for LED strips