Warning And Information Signs; Description; Scope Of Supply - Schluter LT ES 11 Manual De Uso

EN

Description

2.8 Warning and information signs

Symbol Explanation
Corresponds with the requirements of Directives 2004/108/EC and
2006/95/EC.
Suitable for direct assembly to normally flammable surfaces. Normal
flammable surfaces are materials such as wood and materials on a wooden
basis with a thickness of no more than 2 mm.
Suitable for mount onto or into furniture, consisting of materials with unknown
ignition properties.
Corresponds with protection class III (uses safety extra low voltage)
Corresponds with EU Directive 2011/65/EU to limit the use of certain
hazardous materials in electrical and electronic devices.
Corresponds with protection class IP65 (IEC 60529:1989 + A1 :1999 +
A2:2013):
Protection against spray water (nozzle) from any angle.
Corresponds with protection class IP67 (IEC 60529:1989 + A1 :1999 +
A2:2013):
Protection against occasional submersion
Subject to the Waste Electrical and Electronic Equipment (WEEE) Directive
2012/19/EU governing waste electrical and electronic equipment. See
Chapter 13 "Disposal."
3 Description

3.1 Scope of supply

A diagram of the scope of delivery can be found as Figure A on the fold-out pages at the
beginning of the document.
The scope of supply of an LED strip consists of:
LED strip on roll (1)

End caps (3)

Sealing glue (4)

Directions for use

26 Directions for use for LED strips