Installation; Operation - cecotec Power Titanium 1250 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4

3. INSTALLATION

1. Clean the measuring cup, lid, and jar (except main body) before using it for the first time.
2. Make sure the appliance is turned off and not connected before proceeding with the installation.
3. First of all, place the sealing ring on the blade base; then, insert the blade base into the jar; finally, lock it in
place with the fixing ring. Make sure that the blades are properly attached to the jar, in order to avoid leakage
that could damage the appliance.
4. Fit the blender glass jar onto the main body, and turn it in clockwise direction until it clicks into place. Fill the
jug with the desired foodstuffs. Please, make sure water does not spill from the jar. (Maximum water capacity:
1500 ml)
5. Place the lid on top of the jar and push it down. Place the measuring cup on the centre of the lid and lock it
into place.

4. OPERATION

1. Plug the appliance to the mains supply. Make
sure the selector knob is in position 0 before plug-
ging in the appliance.
2. This appliance has a safety system that does
not allow it to work, unless the jar is properly
installed on the main body.
3. Turn the knob to position 0, in order to turn the
blender off.
4. Fill the jar with the desired foodstuffs.
5. Close and fix the lid on the jar. Place the mea-
suring cup on the centre of the lid and turn it to
lock it.
6. Place the glass jar onto the main body and turn
it slightly in clockwise direction to lock it.
7. Select the desired speed with the knob (1-5).
8. Hold the knob in position (P/Turbo) to work at
maximum speed. Ideal to crush ice.
9. While working, the blue light around the knob
will be on.
10. Use the juice filter to prepare juices without pulp. Make sure to fix it properly, so as to avoid damaging the
product. Add the fruit on the inside of the filter; the filter will hold the pulp.
11. When the desired result is achieved, turn the knob to the position 0 to stop the blender.
12. Remove the jar from the main body when the blades stop rotating and serve its content.
Caution:
1. The appliance could get blocked when overfilled. Should that happen, turn it off, unplug it, and remove some
of the content. Then, try again.
2. Do not use the appliance for more than 2 minutes without pauses.
DO NOT USE THE APPLIANCE WHEN IT IS EMPTY
ENGLISH
Power Titanium 1250
11

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido