Warnings And Precautions; Unpacking And Inspection; Instrument Familiarization (See Inside Front Cover) - Amprobe AC68C Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Warnings and Precautions

The AC68C Digital Clampmeter conforms to EN61010-2-032,
EN61010-1, CAT III- 600V, class 2 and pollution deg. 2; and
UL3111-1. It is recommended for use with local level power
distribution, appliances, portable equipment, etc., where only
smaller transient overvoltages may occur, and not for primary
supply lines, overhead lines, and cable systems.
Do not exceed the maximum overload limits per function
(see specifications) nor the limits marked on the
instrument itself. Never apply more than 600 V dc / ac
rms between the test lead and earth ground.
Inspect the DMM, test leads and accessories before
every use. Do not use any damaged part.
Never ground yourself when taking measurements. Do
not touch exposed circuit elements or test probe tips.
Do not operate the instrument in an explosive
atmosphere.
Exercise extreme caution when: measuring voltage
>20 V // current >10 mA // AC power line with inductive
loads // AC power line during electrical storms //
current, when the fuse blows in a circuit with open
circuit voltage >600 V // servicing CRT equipment.
Always measure current in series with the load – NEVER
ACROSS a voltage source. Check fuse first. Never
replace a fuse with one of a different rating.
Remove test leads before opening the case.

Unpacking and Inspection

Your shipping carton should include:
Digital clamp meter
Carrying case
Test lead set (one black, one red)
One 9V battery (installed)
Manual
If any of the items are damaged or missing, return the complete
package to the place of purchase for an exchange.

Instrument Familiarization (See inside front cover)

Transformer Jaws: Designed to pick up the current flowing
through the conductor.
Jaw Opening Lever: Press lever to open transformer jaws.
Release pressure to close the jaws.
Digital Display: 3-3/4 digit LCD (max. reading 3999), with
decimal point, AC/DC, polarity, unit and low battery (
indicators.
Function/Range Selector: Selects the desired function and range.
Changing position turns instrument back on after Auto-OFF.
2
1
1
1
1
1
)
BT

Publicidad

Tabla de contenido
loading

Tabla de contenido