Energy Saving Tips; Using The Cooler; Connecting To Vehicle Power - Dometic TF 14 Instrucciones De Montaje

BordBar TF14
7.1

Energy saving tips

• Choose a well ventilated installation location which is protected against direct
sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
7.2

Using the cooler

I
NOTE
Like every cooling device, your cooler must be properly ventilated so
that any heat created can dissipate. Otherwise proper functioning
cannot be ensured.
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable into the cigarette lighter socket or a 12 V
socket in the vehicle
✓ The cooler starts cooling the interior.
➤ To switch off the cooler, disconnect the plug.
7.3

Connecting to vehicle power

I
NOTE
If you connect the cooling device to the vehicle power, remember that
you may have to turn on the ignition to supply it with power.
EN
Operation
9