Alarm Function; Recording Function; Timer Function - Sanyo MPX-CD163 Manual De Instrucciones

MONITORING FUNCTIONS

Alarm function

Suspicious people can be detected while monitoring by using the alarm setting function. (See page 60.)
External alarm sensor
Motion sensor alarm
(See page 67.)
CAMERA 4

Recording function

A video recording device can be used to record camera images and alarm images taken during monitoring.
Program recording (See page 56.)
VCR
Records camera images

Timer function

By using the timer function, a single day can be divided into four different time and each camera can be operated separately during
each time zone.
Morning
Timer 1
6:00 – 11:00
Images from cameras
1, 3, 5 and 6 are
switched automatically
Automatic switching display and recording of different camera images can be specified for each time zone.
Furthermore, if sensor alarms are set, intruders can be detected during those time zones.
•
Timer setting (See page 36.)
•
Using the timer function for automatic switching display (See page 45.)
•
Using the timer function to record images (See page 58.)
•
Using the timer function to detect motion alarms (See page 67.)
•
Using the timer function to cover the camera image with a gray pattern (See page 48.)
A A
A A
Monitor
Timer 2
11:00 – 13:00
Images from cameras
8, 9, 10 and 16 are
switched automatically
External alarm (See page 12.)
CAMERA 1
Signal loss detection alarm
(See page 68.)
VIDEO LOSS
VIDEO LOSS
VIDEO LOSS VIDEO LOSS
Active recording (See page 64.)
Monitor
VCR
Recording priority is given to alarm images.
Afternoon
Timer 3
13:00 – 18:00
Images from cameras
7, 11, 12 and 13 are
switched automatically
– 14 –
Monitor
Night
Timer 4
18:00 – 6:00
Images from cameras
4, 6, 9, 12 and 16 are
switched automatically
English