Spot Monitor Settings - Sanyo MPX-CD163 Manual De Instrucciones

VIEWING WITH SPOT MONITOR

Spot monitor settings

Press the SPOT MON. button.
1
Camera select buttons 1 to 4 flash and
SPOT
MON.
spot monitor selection standby condition is
enabled.
Note:
•
If a button from 1 to 4 is pressed while
the indicators are flashing, the spot
monitor corresponding to the number of
the button pressed will be selected.
•
If MAIN → SPOT1 on the DISPLAY
SET menu are ON, the spot monitor 1
image will be the same as the main
monitor screen.
Press a camera select button
2
(example: 4).
SPOT
4
MON.
Spot monitor indicator 4 and the SPOT
MON. indicator will flash and S4 will
appear (flashing) on the screen of spot
monitor 4.
Note: S1 to S4 will appear flashing on the
screen of each selected spot
monitor.
Spot monitor 4
– 30 –
3
The image on spot monitor 4 is controlled with the
following buttons.
•
To view each screen as a single-screen.
Press each camera select button.
•
To set all cameras from 1 to 16 to automatic switching.
Press the SEQUENCE button.
•
To set only cameras 1, 2 and 3 to automatic switching.
Specify SPOT MONITOR 4 under SEQUENCE on
DISPLAY SET screen. (See page 45.)
(MAIN MENU)
1 LANGUAGE ¤
2 CLOCK SET ¤
3 DISPLAY SET ¤
4 VCR SET ¤
5 ALARM SET ¤
6 SECURITY SET ¤
7 CONTROL SET ¤
8 ALARM DATA ¤
(*:NEXT)
(SEQUENCE SET)
MAIN MONITOR 1 S ¤
SPOT MONITOR-1 1 S ¤
SPOT MONITOR-2 1 S ¤
SPOT MONITOR-3 1 S ¤
SPOT MONITOR-4 INDIV.¤
QUAD 1 S
INDIV. INTERVAL *
(*:NEXT)
4
Press the SPOT MON. button twice.
Camera image (LIVE) or playback (VCR) mode is enabled.
(DISPLAY SET)
TITLE DOWN ¤
MULTI SCREEN NORMAL¤
SEQUENCE INDIV.¤
MASK ON ¤
MAIN†SPOT1 OFF
DIGITAL CONNECTION OFF
COLOR LEVEL AUTO
(*:NEXT)
(SPOT MON.4 SEQ.SET)
IN IN
01: ON 09: OFF
02: ON 10: OFF
03: ON 11: OFF
04: OFF 12: OFF
05: OFF 13: OFF
06: OFF 14: OFF
07: OFF 15: OFF
08: OFF 16: OFF
English