Specifications - Sanyo MPX-CD163 Manual De Instrucciones

SPECIFICATIONS

Signal format
Camera signal input synchronization
Camera video input connectors
Camera video output connectors
VCR input connector
• • • •
Composite input
• • • •
S-Video input connector
• • • •
Digital input connector
VCR output connector
• • • •
Composite output
• • • •
S-Video output connector
• • • •
Digital input connector
Main monitor output connector
(MAIN MONITOR)
• • • •
S-Video output connector
Spot monitor output connectors
(SPOT MONITOR 1 - 4)
Control connector
• • • •
Remote control input (R1, R2)
• • • •
Alarm output (AL)
• • • •
Switch input (SW)
Alarm input connectors
Sensor alarm output connector
RS-485 control connector
RS-232C connector
Automatic screen switching timing
Monitor on-screen display
Menu settings
Alarm sensor
Back-up function
Operations
• • • •
Still image
• • • •
2x zoom
Power
Consumption
Operating environment temperature
Operating environment humidity
Dimensions
Weight
Products are subject to change in design and specifications without notice and without incurring any obligation.
: Based on NTSC color signal standard
: Asynchronous
: VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 16 Control signal superimposed when camera operating
(MPX-CD93: BNC connector x9)
: Throughput of each input, 1.0 Vp-p/75 Ω, BNC connector x 16 (MPX-CD93: BNC connector x9)
: VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1
: Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω, unbalanced
: RJ-45 x 1
: VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1
: Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω, unbalanced
: RJ-45 x 1
: VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1
Camera live image or VCR playback image output: single-screen, automatic switching image,
multiple-screen
: Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω, unbalanced
: VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 4
Camera live image: single-screen (Same image as main monitor selectable using menu/SPOT MONITOR
1 only)
: 2-wire type with resistance-based identification system
: 5 V DC, 5.7 kΩ (Low output)
: Low input, for input signal from SW OUT of timelapse VCR/real time VCR (as per this manufacturer
specifications)
: No voltage, make-contact switch input x 16 (Low input) (MPX-CD93: BNC connector x9)
: Alarm output x 16 (low output, normally open) (MPX-CD93: BNC connector x9)
: RJ-11 type: 2 connectors (A/B), Push-lock type: 3 connectors (A, B, Ground)
: 9-pin D-SUB
: Available in single-screen and quad mode, with interval selectable from 1 – 30 sec.
: Title (up to 10 characters), date, time selectable
: 8 menus
: Built-in 16 x 10 sensor, 16 channel (each camera video input, selectable) (MPX-CD93: 9 channel)
: Back-up of the clock settings for up to 30 days after connected for 30 hours continuously
: Available for camera live or VCR playback in single-screen and zoomed in still image
: Available for camera live or VCR playback in full screen and frozen picture
: AC 120 V, 60 Hz
: 300 mA (18 W)
: 5 to 40°C
: 10 to 80%
: 420 (W) x 86 (H) x 360 (D) mm
: Approx. 5 kg
– 80 –
English