Sanyo MPX-CD163 Manual De Instrucciones página 47

DISPLAY SET SETTINGS
Use the cursor button to select
9
"T-1", and then press the setting
– +
buttons to change the setting to
"T-2".
Press the setting buttons repeatedly to
switch T-1, 2, 3, 4.
(MAIN MON.SEQ.SET)
(MAIN MON.SEQ.SET)
(MAIN MON.SEQ.SET)
Use the cursor button to select
10
"example: 09:ON", and then press the
– +
setting buttons to change the setting to
"OFF".
Use the same procedure to set OFF
cameras 10 (10) to 16.
(MAIN MON.SEQ.SET)
IN
01:ON
02:ON
03:ON
04:ON
05:ON
06:ON
07:ON
08:ON
If you wish, T-3 and T-4 may be
set with the same operations as
in steps 9 to 10.
Press the BACK button.
11
The setting will then be completed and the
BACK
display will return to the SEQUENCE SET
screen.
Press the BACK button once more to
return to the DISPLAY SET screen.
T-2
T-3
T-4
T-2
IN
09:OFF
10:OFF
11:OFF
12:OFF
13:OFF
14:OFF
15:OFF
16:OFF
Press the MENU button.
12
The display will return to the camera image
MENU SEQUENCE
display screen.
If the SEQUENCE button is then pressed,
the screen images will start switching
automatically according to the settings that
have been made.
Example of automatic switching display
T-1
(6:00 – 12:00)
T-3
(16:00 – 24:00)
Note:
•
When making settings for a spot monitor, select SPOT
MONITOR-1, -2, -3 or -4 and then follow the same procedure.
•
For QUAD screen displays, the timer function cannot be used
to carry out automatic switching of the display.
DISPLAY SET-7
– 46 –
DISPLAY SET-7
T-2
(12:00 – 16:00)
T-4
(24:00 – 6:00)
English