Part Names; Front - Sanyo MPX-CD163 Manual De Instrucciones

PART NAMES

Front

(MPX-CD163)
1
POWER indicator (POWER)
Illuminates when the power cord plug is inserted into a
wall outlet.
2
Spot monitor indicators
When spot monitoring has been set, the indicator for the
specified monitor illuminates. (See page 29.)
3
Camera select buttons and indicators
When a camera is connected to one of the camera video
input (CAMERA IN) connectors at the rear of the
multiplexer and the corresponding button is pressed, the
indicator illuminates and images from that camera are
displayed.
(Indicators)
•
During split-screen monitoring, the indicators for all of
the cameras being displayed in the split-screen
illuminate.
•
When there is alarm input, the indicator for the alarm
input camera flashes.
•
When spot monitoring operation has been set, the
indicator for the specified monitor illuminates.
4
Spot monitor button (SPOT MON.)
This button is used to set spot monitoring.
(See page 29.)
5
Multiple display button and indicator (MULTI)
This button lets you switch the display to a 16-screen
display or 9-screen display while monitoring is being
carried out using the single-screen or 4-screen display.
When the MULTI button is pressed, the 9-screen display
or 16-screen display appears, and the split-screen display
then changes each time the button is pressed again. The
indicator illuminates, but turns off when any other screen
switching operations are carried out.
•
The split-screen display positions can be rearranged
using the menu screen. (See page 41.)
•
For the MPX-CD93 model, a 9-screen display will
appear. The 16-screen display is not available.
English
6
4-screen display button and indicator (QUAD)
This button lets you switch the display to a 4-screen
display while monitoring is being carried out using a
16-screen display or 9-screen display.
When the QUAD button is pressed, the screen switches
to 4-screen display, and the 4-screen display changes (1
– 4, 5 – 8, 9 – 12, 13 – 16) each time the QUAD button is
then pressed. The indicator illuminates to match the
4-screen display.
•
For the MPX-CD93 model, the 4-screen display
changes each time the QUAD button is pressed
(1 – 4, 5 – 8, 9 – 3)
•
The split-screen display position can be rearranged
using the menu screen. (See page 41.)
7
Plus display button and indicator (PLUS)
This button lets you display a specified image in the
lower-right quarter of the screen area while monitoring is
being carried out using a 16-screen display or 9-screen
display (6-screen display or 13-screen display).
When the PLUS button is pressed, the lower-right quarter
of the screen is displayed as a single screen area, and the
indicator flashes. If you press the camera select button for
the image required, that image appears in the quarter
screen. The following operations can be carried out when
this quarter screen is being displayed.
•
If the MULTI button is pressed, the screen changes to a
6-screen display or 13-screen display. The image in the
quarter screen remains unchanged.
(For the MPX-CD93 model, only the 6-screen display is
available.)
•
If the SEQUENCE button is pressed, the SEQUENCE
indicator flashes and the quarter screen automatically
changes. The automatic screen switching speed can be
set using the menu screen. (See page 43.)
8
Live image button and indicator (LIVE)
Press this button to view camera images. The indicator
will illuminate and the camera images will appear on the
monitor.
– 5 –