ALARM SET SETTINGS
Use the cursor button to select
7
ALARM LIST "ON".
–
+
The number of the camera where the
alarm was detected, the date, time and the
type of alarm are recorded in the alarm list.
(ALARM OPERATION SET)
ALARM EXT.AND M.SENSOR
DURATION
RETRIGGER
ALARM LIST
BUZZER
ALARM DISPLAY
Display examples:
•
OFF: Alarm list is not recorded.
•
ON: Alarm list is recorded.
Use the cursor button to select
8
BUZZER "ON".
–
+
The buzzer will sound when an alarm is
detected.
(ALARM OPERATION SET)
ALARM EXT.AND M.SENSOR
DURATION
RETRIGGER
ALARM LIST
BUZZER
ALARM DISPLAY
Display examples:
•
OFF: The buzzer does not sound when an alarm is detected.
•
ON: The buzzer sounds when an alarm is detected.
Note: The alarm buzzer sounds from the front panel of the
multiplexer. If setting the buzzer to sound, place the
multiplexer so that the buzzer sound can be heard from
the multiplexer.
ALARM SET-2
10 S
ON
ON
ON
¤
10 S
ON
ON
ON
¤
– 62 –
Example: To set the alarm duration
•
3 seconds for cameras 01 and 05
Use the cursor button to select
1
DURATION "10S".
(ALARM OPERATION SET)
ALARM EXT.AND M.SENSOR
DURATION
RETRIGGER
ALARM LIST
BUZZER
ALARM DISPLAY
Use the setting buttons to select
2
"INDIV.", and then press the NEXT
–
+
NEXT
button.
The ALARM DURATION SET screen will
be displayed.
(ALARM OPERATION SET)
ALARM EXT.AND M.SENSOR
DURATION
RETRIGGER
ALARM LIST
BUZZER
ALARM DISPLAY
Use the cursor button to select
3
"01:10S", and then press the setting
–
+
buttons to change the setting to
"3S".
Use the same procedure to set the alarm
duration for cameras 02, 03, 04 and 05.
(ALARM DURATION SET)
IN
01: 3 S
02: 3 S
03: 3 S
04: 3 S
05: 3 S
Press the MENU button.
4
The display will return to the camera image
MENU
display screen.
When an alarm is detected at the cameras
that have been set, an alarm is displayed
for the setting duration.
Example of alarm duration display
Cameras 01 to 05
Alarm displayed
for 3 seconds
ALARM SET-2
10 S
ON
ON
ON
¤
INDIV.*
ON
ON
ON
¤
(*:NEXT)
IN
09:10 S
10:10 S
11:10 S
12:10 S
13:10 S
ALARM SET-2
English