Motion Detection - Comelit IPPTZ120IR Manual De Instrucciones

Exposure control: Exposure mode include Full-automatic/ Shutter Priority/ Anti-Flicker, default is Full-automatic. When select
Full- automatic or Anti-Flicker, the shuttle value can not be setted, when select Shutter Priority, the shuttle value can be setted.
Gain: Low/ Medium/ High selectable, default is Low. The bigger of the gain value, the higher of the low illumination sensitivity and
the more obvious of noisy point
Color-mode: Normal/ Bright/ Nature selectable, default is Normal
WB mode: Auto WB/ Inside/ Outside selectable, select different white balance mode according to different scenes, default is Auto
WB
Mirror: Normal/ Horizonal Mirror/ Vertical Mirror/ 180 rotation selectable, default is Normal
Backlight mode: Close/ DWDR/ Backlight correction/ Highlight correction selectable, default is Close
Intensity: Low/ Medium/ High selectable. It is invalid when DWDR mode set as close
DNR mode: Close/ Low/ Medium/ High selectable, default is Medium
Zoom rate: Show/ Hide selectable, set the zoom rate and view the corresponding effect on the screen interface
Coordinate: Show/ Hide selectable, set the coordinate and view the corresponding effect on the screen interface
Status: Show/ Hide selectable, set the status and view the corresponding effect on the screen interface
Zoom speed: Low/ Medium/ High selectable, default is High
Slow shutter: Close/ Open
Defogging:Close/ Open
After all parameters setting completed, click "Save" and the it comes into effect immediately.

Motion Detection

Network High Speed Dome "Motion Detection" setting interface as figure 3-16.
Figure 3-15
13