Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the AV Output
Selects an AV source to be output at the "AV
OUTPUT" terminals.
Display
Setting
"AV-IN1"
Select the AV1 INPUT source.
"AV-IN2"
Select the AV2 INPUT source.
"Off"
No output to the AV OUTPUT terminals.
IR Headphones audio setting
You can select the IR Headphones audio you wish.
Display
Setting
"Normal"
Sound with monitor source.
"AV-IN1"
Select the AV1 INPUT source.
"AV-IN2"
Select the AV2 INPUT source.
"Off"
No output to IR Headphones.
Surround Control
Turns the surround control function On or Off.
Display
Setting
"On"
The surround control function is On.
"Off"
The surround control function is Off.
Frequency Setting
You can set to IR Headphones transmitter
frequency.
Display
Setting
"2MHz"
Set to 2MHz.
"3MHz"
Set to 3MHz.
• Refer to the instruction manual of IR Headphones
(optional accessory), when setting for frequency.
Initializing the User Settings
The setting value is set to the initial state of
factory.
1
Select the Memory clear mode
Press the [MENU] button.
Each time the button is pressed, the menu item
switches.
Memory Clear
2
Set the Memory clear
Press the [2] button.
"System Settings were Initialized" is displayed.
• When you cancel this function, press the [3] button.
3
Exit Menu mode
Press the [MODE] button.
Yes
No
|
7
English
Publicidad
Tabla de contenido
