In order to descale the Wash Tank follow the instructions below:
1.
Remove the chemical tubes from the chemical bottles
and place the ends of the tubes into a container of
water.
2.
Use the commissioning menu to prime the Rinse Aid
and Detergent Pump to draw water all the way into the
warewasher.
3.
Fill and drain the warewasher to remove any chemical
residue.
4.
Refill the warewasher.
5.
Follow the instructions on the chemical packaging to
de-scale the Wash Tank.
6.
Once the de-scale process is complete drain the
warewasher.
7.
Refill and drain the warewasher at least 3 times to
remove any chemical residue.
8.
Refit the chemical tubes to the bottles and prime the
Pumps (►5.4).
9.
Do not overtighten the salt reservoir cap.
22
Classeq Under Counter Range - User Manual