Operation; Main Unit Operation; Auto Operation - Sharp FU-S51E Manual De Uso

OPERATION

MAIN UNIT OPERATION

Mode Selection Button
Plasmacluster Ion Mode
Selection Button
Power ON/OFF Button
• Used to start operation (short beep) and stop operation (long beep)
• Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off.
• Unless unplug the power cord, the operation starts in the previous mode the
• When stop operation during ION SHOWER Operation, the unit will back to the
MODE Selection Button
• The operation mode can be switched.

AUTO operation

The fan speed is automatically switched
(HIGH*, MEDIUM, SILENT) depending
on the amount of impurities in the air. The
sensors detect the impurities for efficient
air purification.
POLLEN mode operation
The unit will operate at HIGH* fan speed
for 10 minutes, then will alternate be-
tween MEDIUM and HIGH* for 20 min-
utes.
10 minutes: HIGH fan speed
20 minutes: MEDIUM fan speed
20 minutes: HIGH fan speed
* HIGH fan speed is an intermediate speed
between MEDIUM and MAX.
unit was operated in.
prior operation of ION SHOWER Operation.
SILENT operation
The unit will operate quietly
using minimal air intake.
MEDIUM operation
The unit will operate at a fan
speed of MEDIUM.
MAX operation
The unit will operate at a fan
speed of MAX.
E-8