Product Specifications; Battery Removal - Hkoenig SWRC90 Manual De Instrucciones

Product Specifications

Classification
Mechanical
Specifications
Electrical
Specifications
Cleaning
Specifications
Main Body Button Type

Battery Removal

1. Remove the screws on battery cover with a screw driver.
2. Remove the battery cover.
3. Grasp the insulating tape at two sides of the battery and lift the battery.
4. Unplug the wire connector that links the battery and robot.
Note: Only use the original battery of the product, otherwise it may cause product damage.
Battery replacement of the space isolator :
1. Spin the pivot as per figure 1 and the cover will open.
2. Please place the batteries with correct polarity (=/-)
3. Please take out the battery if it was unused for long.
Item
Diameter
Height
Weight
Power Rating
Battery specifications
Dust bin Capacity
Charging Type
Cleaning Mode
Charging Time
Cleaning Time
Detail
340mm
88mm
3.5Kg
14.4V
Ni-MH 2000mAH
0.5L
Auto Charging/ Manual Charging
Auto, Spot, Edge, "弓", Schedule
240~300 mins
80 ~ 90mins
Touch pad (LED display)
19