Positioning The Virtual Wall - Hkoenig SWRC90 Manual De Instrucciones

VIRTUAL WALL
The virtual wall is an accessory which allowing you to define the cleaning area. It is sending a horizontal
linear infrared signal to prevent the vacuum from entering certain unwanted areas/rooms.

Positioning the virtual wall

• Place the virtual wall on the floor where you want to send the blocking signal, press the ON button. Then,
the light should switch on.
• The virtual wall should be placed more than 3 meters from the charging base, to avoid any interference.
• The charging base must not be installed in the radius or in front of the virtual wall.
• The virtual wall must also be keep out of direct sunlight so as not to disturb the communication with the
robot.
15