Cleaning The Cuff And Recorder; Periodical Inspection; Problem Solving - A&D TM-2430 Manual De Instrucciones

Cleaning the cuff and recorder

❏
Before cleaning the recorder, remove the battery cover and turn the power
switch off. Remove the batteries.
❏
The recorder is not water resistant, do not allow liquids to splash on or get into
the case while cleaning.
❏
After each use, wipe the case of the recorder with a clean lint free cloth,
moistened with water and a mild detergent.
❏
Do not use antiseptic solutions, Alcohol, etc., to clean the recorder, hose or cuff.
❏
Clean the cuff cloth and cuff cover by washing in water with a mild detergent.
Do not scrub or wring them by hand. If the cuff cloth and cuff cover become
contaminated, replace them with new covers.

Periodical inspection

❏
This blood pressure recorder is a precision instrument. Please inspect the
functions (every year) periodically. Contact your nearest A&D office for this
inspection.

Problem solving

Caution
❏
Do not open the case of the recorder because it uses delicate electrical
components and an intricate air unit that could be damaged.
❏
If you can not locate and fix the problem, request service from your supplier,
or from the A&D service group.
❏
A&D service group will support authorized suppliers with technical informa-
tion, spare parts and units.
Problem
No display at turn-
ing on.
Data lost while re-
placing batteries.
No pressure.
Maintenance
Cause
Battery power has been
consumed.
Unable to charge the in-
ternal sub battery.
Air leakage at the con-
nector, hose or cuff.
Page 31
Treatment
Replace with new batteries
Set monitor for clock display
mode for approx. 24 hours. Do
not take BP measurement. The
sub-battery battery charges dur-
ing clock display mode.
Confirm the cuff and air hose
are not damaged and are con-
nected correctly.
Cleaning the Cuff and Recorder