CLEANING AND STERILIZATION
Otoscope head:
Clean the outside with a soft cloth, inside with a cotton wool bud, if necessary soaked in
disinfectant or water.
Do not use rough cloth for cleaning the lens to avoid scratches.
Reusable Ear tips:
These can be cleaned, disinfected
Autoclaving is allowed
Opthalmoscope
The Opthalmoscope is designed for all general opthalmic examination.
Features:
- Made from Impact Resistant re-enforced plastic.
- Enhanced Xenon/Halogen super bright light.
- Easy replacement of lamp.
- Dust proof housing.
- 6 apertures to select from, micro spot, small spot, large spot, fixation, slit and red-free filter.
This selection of apertures covers all the physician's needs in an ophthalmologic examination.
- Color coded 28 lenses for perfect examination (Green for +, Red for - )
0
1
1
OPERATING INSTRUCTION
Attach the ophthalmoscope head to the handle by bayonet locking system, it is necessary to
hold the battery handle and head in each hand and match the bayonet grooves on both the
head and handle, push the head down and turn the head clock wise as in Fig.1.
1. Check that the connection between the head and handle is perfect and that the rheostat
works properly.
2. Push the white button (A) on the handle and twist the black knob towards the left hand side.
The unit is now in operating position. The intensity of the light can be adjusted by turning the
knob clock wise or counter clock wise.
3. Gently place the rubber eye brow (B) near your eye. Viewing through window (C) point the
light beam at the center of the eye lens.
4. With your index finger turn the wheel (D) clockwise or counterclockwise to select the desired
lens. The power of the selected lens is visible through window (E).
5. The ophthalmoscope is equipped with a set of 6 different aperture, which can be selected
by turning the wheel (F).
6. Switch off the unit after use to preserve batteries. Twist the black knob towards right until
an audible click sound is heard once the button (A) comes to its off position.
ENGLISH
or
sterilized by any conventional method.
(134°C 28 psi
MAX).
2
3
4
5
6
2
3
4
5
6
7
8
9
10 12 15 20 40
7
8
9
10 15 20 25
10