On The Lang Positioning System; Quick-Change System For The Top Jaws - Garant XTRIC Manual De Instrucciones

GARANT XTRIC centring vice

5.3. ON THE LANG POSITIONING SYSTEM

Hexagon L-wrench size 8, clamping stud for Quick-Point 52, cleaning cloth.
en
Fig. 4: Centring vice for Quick-Point
1. Clean the underside of the centring vice and the upper face of the Quick-Point.
2. Screw in the mounting pin for Quick-Point with centring vice.

5.4. QUICK-CHANGE SYSTEM FOR THE TOP JAWS

Cleaning cloth, top jaws
Tab. 2: Mounting and removing the top jaws
1. Clean the interfaces between the centring vice and top jaws.
2. Insert the top jaw into the dovetail slot and press it down with the spring plates.
3. For disassembly, pull on the underside of the top jaw or lever it off with a screwdriver.
22 Instruction manual