On The Machine Table; On A Garant Zeroclamp - Garant XTRIC Manual De Instrucciones

5.1. ON THE MACHINE TABLE

4 × stepless adjustable clamps (No. 363081 80), cleaning cloth.
Fig. 2: Centring vice for machine table
1. Clean the machine table and the underside of the centring vice.
2. Position the centring vice on the machine table.
3. Fit the stepless adjustable clamps and bolt them to the machine table with an appropriate at-
tachment set.

5.2. ON A GARANT ZEROCLAMP

Hexagon L-wrenches sizes 6 and 8, adapter plate (No. 363080) for GARANT ZeroClamp,
clamping stud (select a suitable stud for the clamping pot), cleaning cloth
Fig. 3: Centring vice with GARANT ZeroClamp
1. Clean the underside of the centring vice, both faces of the adapter plate (No. 363080) and the
upper face of the clamping pot.
2. Bolt the clamping stud on to the adapter plate.
3. Position the adapter plate (4 × bolts supplied) on to the centring vice and bolt them together.
www.hoffmann-group.com
en
21