Grease The Spindle; Grease The Guides - Garant XTRIC Manual De Instrucciones

GARANT XTRIC centring vice

8.2. GREASE THE SPINDLE

Cleaning cloth, machine grease, brush, hexagon L-wrench size 5
en
Fig. 6: Grease the spindle
1. Clean the spindle.
2. Use the brush to apply machine grease to positions 1 and 2 on the spindle.
3. Use the hexagon L-wrench to rotate the spindle so that the spindle nuts move back and forth
throughout their full range of movement.

8.3. GREASE THE GUIDES

Cleaning cloth, machine grease, brush, hexagon L-wrench size 5
6
Fig. 7: Grease the guides
1. Clean the guides.
2. Use the brush to apply machine grease to the guides, see positions 1 to 6.
3. Use the hexagon L-wrench to rotate the spindle so that the spindle nuts move back and forth
throughout their full range of movement.
26
1
2
1
2
4
3
5
Instruction manual