Maintenance - OPTIKA MICROSCOPES B-800 Manual De Instrucciones

5.0 MAINTENANCE

5.1 Always think about
- The following environment is required:
Indoor temperature: 0-40°C; Maximum relative humidity: 85 % (non condensing).
- Keep the microscope away from dust and shocks while in use.
- Turn off the light immediately after use.
- Use a soft lens tissue to clean the optics after use.
- Only if needed, use a cloth moistened with water and a mild detergent, rinsing with water and drying
immediately with a lint-free cloth.
- After use, cover the microscope with the included dust-cover, and keep it in a dry and clean place.
5.2 Do not!
- Wipe the surface of any optical items with your hands. Fingerprints can damage the optics.
- Use solvents, neither on the microscope, nor on the optics.
- Disassemble objective or eyepieces to attempt to clean them.
- Mishandle or impose unnecessary force on the microscope.
- Clean the unit with volatile solvents or abrasive cleaners.
- Attempt to service the microscope yourself.
B-800: the high-efficiency white LED source in B-800 is designed to last many years without any per-
formance decrease. Never try to replace it with another kind of LED source. In case of malfunctioning
contact OPTIKA service.
5.3 If you need to send the microscope to Optika for maintenance, please use the original packaging.
Page 10