File Delete At Usb (By Remote Control) - THOMSON TT500CD Instrucciones De Funcionamiento

Equipo profesional de tocadiscos, cd/mp3, radio pll y codificación en usb
Tabla de contenido

Publicidad

TRACK SEPARATION (BY REMOTE HANDSET)
YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO, OR RADIO TO USB TRACK BY TRACK DURING
ENCODING. EVERY TIME WHEN PRESS THE "
HANDSET DURING ENCODING FROM PHONO, TAPE OR RADIO TO USB, THE SYSTEM WILL GENERATE A
NEW TRACK AND CONTINUOUS THE RECRODING. THE TEXT " PHONO ", OR " TUNER " AT LCD DISPLAY (2)
WILL FLASHING ONE TIME, IT MEAN THE UNIT IS CREATING A NEW TRACK SUCCESSFULLY.
ENCODING BITRATE (BY REMOTE HANDSET)
YOU CAN SELECT THE DESIRED BITRATE DURING ENCODING FROM CD/TAPE/PHONO/RADIO AND AUX-1 IN
TO USB, THE SELECTABLE RANGE FROM 64 / 128 / 192 KBPS.
1.
SET IN " PHONO/AUX " FUNCTION (11) & REMAIN STOP MODE.
2.
PRESS THE " INFO " FUNCTION AND THE LCD DISPLA WILL SHOW THE DEFAULT BITRATE (128 KBPS).
3.
PRESS SKIP
4.
PRESS AGAIN THE " INFO " BUTTON TO CONFIRM THE SETTING AND THE LCD DISPLAY (2) RESUME TO
" PHON/AUX " MODE.

FILE DELETE AT USB (BY REMOTE CONTROL)

THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB PEN DRIVE BY FOLLOWING:-
A) SINGLE FILE DELETE (BY REMOTE HANDSET)
1. PRESET AT " USB " MODE.
2. PRESS THE " DELETE " BUTTON AND THE LCD DISPLAY (2) WILL SHOW (DEL ---001).
3. PRESS SKIP FORWARD
4. PRESS THE " DELETE " BUTTON TO ENTER " YES / NO " MODE AND THEN PRESS SKIP FORWARD
SKIP BACKWARD
5. PRESS THE " DELETE " BUTTON AGAIN TO CONFIRM THE SETTING.
REMARK :
-
PRESS " STOP " BUTTON ONCE AT REMOTE HANDSET TO QUITE DELETE MODE.
REMOVING OF USB
TO REMOVE THE USB, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO EITHER CD, PHONO
OR TUNER FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET DIRECTLY.
PHONO
OPERATION
-
REMOVE THE STYLUS PROTECTOR.
-
BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM
REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.
1.
PRESS FUNCTION BUTTON (11) TO SELECT " PHONO/AUX " MODE.
THE LCD DISPLAY (2) WILL SHOW " PHONO/AUX ".
2.
SET THE SPEED SELECTOR (31) TO THE PROPER POSITION DEPENDING ON THE RECORD TO BE
PLAYED.
3.
PLACE THE RECORD ON THE PLATTER (USE THE SPINDLE ADAPTOR IF REQUIRED).
4.
SET THE CUEING LEVER (29) TO THE UP POSITION.
5.
LIFT THE TONE ARM FROM THE REST AND SLOWLY MOVE IT TO THE RECORD SIDE. THE PLATTER WILL
START TO ROTATE AND LOCATE THE TONE ARM OVER THE DESIRED POSITION OF THE RECORD.
6.
PULL DOWN THE CUEING LEVER (29). THE TONE ARM WILL COME SLOWLY ON THE RECORDER AND
START PLAYBACK.
7.
AT THE END OF RECORD, THE TONE ARM WILL RETURN TO THE REST POSITON AUTOMATICALLY.
8.
TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE REST.
REMARK : DUE TO THIS DEVICE DESIGNED PHONO AND AUX IN THE SAME CHANNEL. WHEN AUX JACK
WAS PLUGGED BY 3.5MM PLUG, THE CHANNEL WILL SWITCH TO AUX FUNCTION AUTOMATICALLY.
PLEASE REMOVE THE 3.5MM PLUG FROM THE AUX JACK(5) DURING PLAY THE PHONO.
PLAY SUSPENSION
SET THE CUEING LEVER (29) TO THE UP POSITION WILL LIFE UP THE TONE ARM AND THEN STOP
PLYABACK TEMPOARILY.
PLAY EJECTION
PRESS THE EJECT BUTTON (15) ANYTIME DURING PLAYBACK WILL RETURN THE TONE ARM TO THE REST
POSITION IMMEDIATELY.
OR
BUTTONS (17/19) TO SELECT THE DESIRED BITRATE FOR ENCODING.
OR SKIP BACKWARD
TO SELECT " YES " OR " NO ".
" (TRACK SEPARATION) BUTTON ONCE AT REMOTE
BUTTON TO SELECT THE FILE GOING TO DELETE.
EN-7
OR

Publicidad

Tabla de contenido
loading

Tabla de contenido