How To Replace The Fuse - Urrea 2363E Manual De Usuario

2. After extending the suction tube rotate the
joint nut clockwise to fix the suction tube in
the extended position.

HOW TO REPLACE THE FUSE?

1. Remove the Hose Barb from the Outlet.
2. Unscrew all the bolts to Remove the Hose
Barb from the Outlet.
3. Replace the older fuse with a new one.
4. Upper body must be perfectly seated while
assembling the pump again.
12
5. Make sure that the Nozzle holster is perfect-
ly seated as shown in the picture.
6. Screw all the bolts to assemble the pump.
7. Screw back the Hose barb onto the outlet.