Display; Adjusting The Display Brightness; Setting The Display Illumination Colour - Blaupunkt Brisbane SD48 Instrucciones De Manejo

Display

Display
If you switch on the vehicle illumination,
the display brightness switches day mode
to night mode. This requires that your car
sound system is connected as described in
the installation instructions. Your vehicle
must feature the corresponding connection
option.

Adjusting the display brightness

You can adjust the display brightness
separately for night (DIM NIGHT) and day
(DIM DAY) in steps ranging from 1 to 16.
Press the MENU button >.
u
The display shows "MENU".
Press the or
u
until "DIM DAY" or "DIM NIGHT" appears
on the display.
button 2 to call up the
Press the
u
submenu.
"DAY" or "NIGHT" and the currently set value
are displayed.
Press the or
u
the brightness.
When you have fi nished making your
changes,
press the MENU button >.
u
To exit the menu,
press the ESC button <.
u
30
button 2 repeatedly
button 2 to adjust
Setting the display illumination
colour
For the display illumination, you can se-
lect a colour from the RGB spectrum (red-
green-blue) or mix using the colours red
and green, select a colour during the col-
our scan or switch on a constant colour
change.
Mixing the color for the display
illumination (DISP COL)
To customise the display illumination to suit
your tastes you can either mix a colour your-
self using the three primary colours red,
green and blue (RGB) or from the colours
red and green (RG).
Press the MENU button >.
u
The display shows "MENU".
Press the or
u
edly until "DISP COL" appears on the
display.
Press the button 2 to open the RGB
u
menu or the
RG menu.
The display shows "4096 COL" for the RGB
menu or "256 COL" for the RG menu.
button 2 to open the
Press the
u
menu for mixing your own colour.
Either "R", "G", and "B" or "R" and "G" are
displayed with the current values. The set-
ting for "R" is activated. You can adjust a
value from 0 to 16 each for every available
colour component.
button 2 repeat-
button 2 to open the