About these instructions
About these instructions
These instructions contain important infor-
mation to easily and safely install and oper-
ate the device.
•
Read these instructions carefully and
completely before using the device.
•
Keep the instructions at a location so
that they are always accessible to all
users.
•
Always pass on the device to third par-
ties together with these instructions.
In addition, observe the instructions of the
devices used in conjunction with this de-
vice.
Symbols used
These instructions employ the following
symbols:
DANGER!
Warns about injuries
DANGER!
Warns about accidents
DANGER!
Warns about hearing loss
The CE mark confi rms the com-
pliance with EU directives.
Identifi es a sequencing step
u
•
Identifi es a listing
6
Use as directed
This device is intended for installation and
operation in a vehicle with 12 V vehicle sys-
tem voltage and must be installed in a DIN
slot. Observe the 'performance limits in the
technical data. Repairs and installation, if
necessary, should be performed by a spe-
cialist.
Declaration of conformity
The Blaupunkt GmbH declares that the
Brisbane SD48 device complies with the
basic requirements and the other relevant
regulations of the directive 89/336/EWG.