Connection; Important - Kenwood DPX302U Manual De Instrucciones

Wiring connection
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Car fuse box
Ignition switch
Car fuse box
Battery
Front/ Rear/ subwoofer output
White
White/Black
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 12)
If no connections are made, do not let the wire come out from the tab.
Gray
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
Light blue/yellow
(Steering remote control
wire)
IMPORTANT : We recommend installing the unit with a commercially
available custom wiring harness specific for your car and leave this job
to professionals for your safety. Consult your car audio dealer.
When connecting to an external amplifier, connect its ground wire to
the car's chassis to avoid damaging the unit.
To the terminal that is grounded when the
telephone rings or during conversation ( 19)
(To connect the Kenwood navigation system,
refer your navigation manual.)
To the power control terminal when using the
optional power amplifier or to the antenna
control terminal in the vehicle
To the steering wheel remote control adapter
23
ENGLISH