Troubleshooting - Teka TKX3 1263 BLANCA Manual De Instrucciones

Troubleshooting

Troubles
Washing machine
cannot start up
Door cannot be
opened
Heating fault
Water leakage
Water is
overflowed from
the bottom of the
machine
Indicator or
display does
not light.
Detergent
residues in the
box
Washing effects
are not good
Abnormal noise
Great vibration
Reason
Machine's safety protection
design is working.
NTC is damaged and heating
pipe is aging.
The connection between inlet
pipe or outlet hose and tap or
washing machine is not tight.
Drain pipe in the room is blocked.
The inlet pipe is not connected
firmly.
Outlet hose has water leakage.
Power is disconnected.
PC board has problems.
Harness has connection
problem.
Washing powder is dampened
and agglomerated.
The clothes are too dirty.
Insufficient detergent quantity.
Solution
Check if the door is closed tightly.
Check if power plug is inserted well.
Check if water supply tap is opened.
Check if button "Start/Pause" is pressed.
Check if button " On/Off
Disconnect the power.
Can normally wash the clothes.
Only cannot wash with heating.
Shall contact the service center promptly.
Check and fasten water pipes.
Clean up outlet hose and ask a
specialized person to repair it when
necessary.
Fix the inlet pipe.
Replace the drain hose.
Check if the power is shut down and
power plug is connected correctly.
If not, please call up service line.
Clean and wipe the box.
Use liquid detergents or the detergents
special for drum.
Select a proper procedure.
Add the proper detergent quantity
according to the instructions in
detergent package.
Check if the fixing (bolts) has been removed.
If cabinet is installed on the solid and level
floor.
Check if there are any barrettes or metal
articles inside.
Check if the legs in the washing machine
are adjusted level.
23
" is pressed.